flyingstart-mazda3-m

GET OFF TO A FLYING START

Your first month of driving before your complimentary inspection is important.
We know you’ll be eager to head out on
the open road, so there are a few things
you can do during this period to make
sure your Mazda3 maintains its
long-term performance.

Note: If your Mazda3 is manual, always leave it in first gear with the handbrake fully engaged when parked.

AVOID SITTING AT ONE SPEED FOR A LONG PERIOD OF TIME BY SAFELY VARYING YOUR SPEED.

DON'T DRIVE AT FULL THROTTLE OR HIGH ENGINE REVS FOR EXTENDED PERIODS.

AVOID UNNECESSARY HEAVY BRAKING.

DON'T TOW A HEAVY TRAILER

Your complimentary inspection

Your complimentary inspection

A quick monthly checklist

You can help maintain the performance of your Mazda between services. Taking an extra bit of time to ensure everything is in order can save you time and stress in the long-run.
Use these simple steps to keep your vehicle at its best.

Check Coolant

coolant

Regularly check the plastic reservoir’s level to ensure your Mazda3’s engine is running at optimal temperature.
It should be between the high
and low marks.

CHECK TYRES

Tyres

The tyres on your Mazda3 are one
of your car’s most important safety features, so it’s important you check your tyre pressures at least once
a month. You’ll find the correct
tyre pressures in the driver’s door jamb area.

CHECK WASHER FLUID

Washer

Fill the washer bottle with clean water and the appropriate amount of windscreen washer fluid.

Note: We recommend genuine washer fluid, as household detergents can damage paintwork 
and wiper blades.

CHECK OIL

Oil

Park on level ground with the engine warm. If you’ve just been driving, wait a few minutes. Remove the dipstick and wipe it clean with a
lint-free cloth. Reinsert and check oil level. If it’s at the low end of the marks, top up using oils that meet Mazda specifications from your Mazda Dealer.

Your first full service and oil change

Oil-Can

The original oil in your new Mazda3
is specially blended to optimise engine run-in and ensure long-term performance. Mazda recommends this first fill is replaced with oil
that meets Mazda specifications after 12 months or 15,000km,
whichever comes first, to ensure maximum longevity.

All care is taken to ensure the accuracy of this quick guide. Specifications, features, and model availability may vary from state to state and may change without notice. Please refer to mazda.com.au or consult your Mazda Dealer for current information. Mazda Australia Pty Ltd will not be liable for any loss arising from the information in this quick guide, whether in negligence or otherwise. Mazda Australia Pty Ltd ABN 78 004 690 804, 211A Wellington Road Mulgrave, Victoria 3170.